Plastic Bottle Manufacturers in India
PET, HDPE, and PP bottles for water, beverages, oils, personal care, pharma, and industrial chemicals. Multiple neck-finish standards, custom mould options, and full-decoration support.
- 10suppliers list this category
- 5,000 unitstypical minimum order
- 21specification choices on the RFQ form
What buyers specify most
- PET / HDPE / PP variants — clear, opaque, food-grade
- Standard + custom neck finishes (PCO 1810, 28-410, 24-410, etc.)
- Decoration: in-mold labels, sleeves, screen + UV printing
Plastic Bottles: variants and options
These are the choices Kypson’s RFQ form asks for, so a quote comes back comparable across suppliers instead of each one answering a different question.
- Bottle Type
- Round · Square · Oval · Boston Round · Cosmetic · Pharmaceutical · Industrial / Jerry-can
- End Use
- Drinking Water · Beverages (CSD / Juice) · Edible Oil · Pharma (OTC) · Pharma (Prescription) · Cosmetics · Personal Care · Industrial Chemicals · Agro Chemicals · Other
- Fill Type
- Cold Fill · Hot Fill · Aseptic Fill · Carbonated
- Dimensional Tolerance
- ±0.5 mm · ±1 mm · ±2 mm · Custom
- Resin
- PET (Virgin) · PET (rPET) · PET (Mix — specify %) · HDPE · PP · LDPE · PVC
- Intrinsic Viscosity (IV)
- 0.74 dl/g (Water) · 0.80 dl/g (CSD) · 0.84 dl/g (Hot fill) · Custom
- Bottle Color
- Clear · White (opaque) · Amber · Blue · Green · Custom Pantone / Masterbatch
- Neck Finish Standard
- PCO 1810 (28 mm CSD/Water) · PCO 1881 (28 mm Lightweight) · 29-25 (Water) · 30-25 (Generic) · 28-410 (Cosmetic Cap) · 24-410 (Lotion / Toner) · 20-410 (Spray / Dropper) · 38 mm (Edible Oil) · Custom
- Closure Type
- Screw Cap · Sports Cap (Push-Pull) · Flip-Top · Disc-Top · Spray Pump · Lotion Pump · Trigger Spray · Dropper · Tamper-Evident Cap · Child-Resistant Cap
- Tamper-Evident
- Yes · No
- Closure Liner / Inner Seal
- None · PE Foam Liner · Induction Seal (Heat-Sealed Foil) · Pressure-Sensitive Liner
- Decoration Method
- None (Plain) · In-Mold Labelling (IML) · Pressure-Sensitive Label · Shrink Sleeve · Screen Printing · UV / Hot-Foil
- Label Material
- BOPP · Paper · PET · PVC
- Artwork Status
- Print-Ready (AI/PDF) · Needs Design Help · Existing artwork (provide reference)
- Anti-Counterfeit
- None · Hologram on closure · Tamper Band · QR/Barcode etched
- Handle / Grip
- None · Integrated Handle (≥3L) · Add-on Plastic Handle
- Export Compliance
- Not Applicable · EU Food Contact (1935/2004) · REACH · RoHS · Other
- Call-Off Schedule
- Single Shipment · Monthly Releases · Weekly Releases · Quarterly Releases
- Shipper Packaging
- Master Cartons · Shrink-wrapped Pallets · Bulk Bag · Custom
- Required Delivery Timeline
- Within 7 days · 2–3 weeks · 4–6 weeks · 8+ weeks (production schedule)
- Incoterms
- EXW · FOB · CIF · DDP · DAP
Typical specification
A common starting point, not a constraint — every field is adjustable on the RFQ.
| Weight | Varies by capacity & neck finish |
|---|---|
| Dimensions | 30 ml to 5 L |
| Capacity | Custom |
| Color | Clear, custom Pantone, masterbatch |
| Printing Type | In-mold / Sleeve / Screen / UV |
| Certification | FSSAI / FDA / BIS |
| Packaging | Master cartons or shrink-wrapped pallets |
Industries buying plastic bottles
- Beverages
- Food
- Cosmetic and Personal Care
- Healthcare
- Chemical and Lubricants
How sourcing works on Kypson
- Post one RFQFill the plastic bottles specification once — dimensions, material, printing, quantity and deadline.
- Matched suppliers quoteIt reaches manufacturers who make this category, matched on capability, capacity and location rather than who paid for a listing.
- Compare like for likeBecause every quote answers the same specification, the comparison is real. Then order and track to delivery.
Plastic Bottles: common questions
What is the minimum order quantity for plastic bottles?
Suppliers on Kypson typically quote from 5,000 units for plastic bottles, though the workable minimum varies by manufacturer and by how customised the specification is. Posting an RFQ is the reliable way to find out: you get the real minimum from the suppliers who would actually take the job, rather than one figure applied to everyone.
What types of plastic bottles can I source?
The RFQ form covers Round, Square, Oval, Boston Round, Cosmetic, Pharmaceutical, Industrial / Jerry-can. Choosing on the form rather than in email matters, because it is what makes returning quotes comparable — every supplier is answering the same question.
What is plastic bottles typically used for?
Buyers on Kypson most often specify plastic bottles for drinking water, beverages (csd / juice), edible oil, pharma (otc), pharma (prescription), cosmetics, personal care, industrial chemicals, agro chemicals, other. End use is part of the specification because it changes what a supplier recommends — the same nominal product is built differently for different contents.
What weight or thickness should I specify for plastic bottles?
A common starting point is Varies by capacity & neck finish. It is a starting point rather than a rule: the right figure depends on the load, the filling method and how the goods are handled in transit. Suppliers will advise against a specification that will not survive the journey, which is a conversation worth having before the order rather than after it.
Are plastic bottles suppliers on Kypson certified?
Certifications commonly held for this category include FSSAI / FDA / BIS. Kypson records a supplier's certificates on their company profile, and you can require a specific one on the RFQ so only suppliers holding it are asked to quote.
How do I get quotes for plastic bottles?
Post one RFQ with your specification, quantity and deadline. It reaches manufacturers matched on capability, capacity and location rather than on who paid for placement, and their quotes come back against the same specification so the comparison is real. There is no charge to post an RFQ or to compare the responses.
Get quotes for plastic bottles
One RFQ. Comparable quotes from suppliers who actually make this.
Post an RFQ