Agriculture Packaging Suppliers in India
Agricultural packaging moves grain, seed, fertiliser, feed and produce in bulk, and the right pack is decided by weight and by how it is filled. Ten to fifty kilograms goes in woven polypropylene sacks. Powders and fertilisers filled at speed go in AD Star block-bottom valve bags at 25 or 50 kilograms. Anything from 250 kilograms to two tonnes goes in an FIBC, engineered to a stated safe working load. PE liners and BOPP-laminated bags belong to the same group and are not yet listed here. The three that are listed cover most of what leaves a farm or a mill, and they are specified in different terms — GSM and lamination for sacks, filling and discharge for valve bags, load rating and construction for bulk bags.
Packaging categories for agriculture
BOPP laminated bags, PE liners are also part of this group and are not yet listed on Kypson. An RFQ can still describe them — the requirement reaches our sourcing team either way.
Choose by weight and by the filling line
Woven PP sacks are the general answer for 10, 25 and 50 kilogram packs: 60 to 80 GSM fabric, laminated where moisture is a risk and unlaminated where breathability matters, UV-stabilised if bags will sit in the open. The spec sheet's own guidance for food grain is to add an inner liner. AD Star bags are chosen when the product is a powder and the line is automatic: the block bottom stacks flat, the valve fills fast and seals dust-tight, and the sheet's note for cement-like powders is that air permeability has to be controlled for the bag to discharge air during filling. FIBCs take over above 250 kilograms and are specified on safe working load first — the sheet covers 250 to 2,000 kilograms at a 5:1 safety factor for single-trip use and 6:1 for multi-trip — then on construction: four-panel, U-panel, circular or baffled for a squarer, more stable bag.
What moves the price
For sacks: GSM, lamination, UV stabilisation and print — screen or flexo, by colour count. For valve bags: the valve and bottom construction, 70 to 90 GSM fabric, and the dust-proofing. For bulk bags: fabric of 140 to 200 GSM, the construction, lifting loops, discharge spout, a liner, and whether the bag is single- or multi-trip, which changes the safety factor and therefore the fabric. Minimums on the standard sheets are 1,000 sacks, 500 valve bags and 500 bulk bags. Agricultural demand is seasonal, and a buyer ordering against a harvest calendar gets better pricing and delivery than one ordering into it.
What buyers get wrong
Stating a bag size instead of a fill weight and a bulk density, which is what actually sizes a sack or a bulk bag. Leaving out UV stabilisation and then storing bags in a yard, where unstabilised polypropylene weakens in months. Specifying an FIBC without saying whether the product is a powder or a granule — powders need sift-proof seams, and the sheet says so. Treating the print as an afterthought: fertiliser and seed bags carry mandated label text, print is quoted per colour whether by screen or flexo, and artwork that changes after the quote changes the price. And ordering single-trip bags for a multi-trip use, which is a safety question before it is a cost one: the 6:1 factor exists for bags that are lifted more than once.
Agriculture: common questions
Woven PP sack or AD Star bag for 25 kilograms of fertiliser?
AD Star if the product is a powder or granule filled on an automatic line: the valve fills fast and seals dust-tight, and the block bottom stacks flat. Woven PP if filling is manual or the product is coarse. State the filling method on the RFQ and the choice usually makes itself.
Do I need a liner?
For food grain the spec sheet recommends an inner liner. For anything moisture-sensitive, a liner or a laminated fabric is the choice, and which is better depends on whether the pack also needs to breathe. Liners are a separate PE product and should be specified with the bag so they fit the gusset.
What is safe working load on an FIBC?
The maximum weight the bag is engineered to carry, stated on the bag, with a safety factor of 5:1 for single-trip bags and 6:1 for bags lifted more than once. Bulk bags on the standard sheet run from 250 kilograms to two tonnes. Specify the load and the trip use, not just a size.
Are BOPP laminated bags listed?
Not yet. BOPP-laminated bags and PE liners are part of this group and are not listed on Kypson today. An RFQ can still describe them and reaches the sourcing team.